Standards and certifications

The DDCE product and all its models have passed the laboratory tests required by the UNE EN IEC 62305 standard as an aerial terminal within the LPS (Lightning Protection System) and, in the same sense, complies the requirements as an air terminal within the LPS of standards based on UNE EN IEC 62305, such as, among others: NBR 5419:2018, IRAM 2184:2011, NTC 4552:2008, SANS 1013:2012, AS/NZS 1768/2007, JIS Z 9290, etc., as well as CTE-SU8 and NFPA 780.

Standard UNE EN IEC 61400-24:2019 (section D.3.3)

standard UNE EN IEC 61400-24:2019 (section D.3.3)

standard UNE EN 62561-1:2018

The DDCE, dineol and dinfil device complies with the General Law of Product Safety and the working limits of electromagnetic compatibility, under the requirements of CE marking:

• 2014/35/EU (LVD)

• 2014/30/EU (EMC)

• 2014/53/EU (RED)

Dinnteco International S.L, works with the Quality Management System according to the international standards ISO 9001:2015, applied to:

• design, commercialization, management, manufacturing, assembly and mounting of variable electric field compensating lightning rods.

The DDCE has been officially classified by NATO as a "Lightning Protection and Electromagnetic Protection System" with the NATO code of the DDCE:NCAGE:SYN37.

• The DDCE has been selected as a NATO Cataloguing System (SOC), by means of which it is guaranteed that the same item is known within the scope of the logistics of the nations using the system, by the same and unique denomination and the same and unique NATO Catalogue Number (NOC).

It complies with the requirements of preventive action (Article 5) of Law 31/1995 of 8 November 1995 on the Prevention of Occupational Risks, as well as RD 614/2001 of 8 June 2001, on minimum provisions for the protection of the health and safety of workers against electrical hazards.

Product certified by UL LLC. as Class I Air Terminal according to ANSI/CAN/UL-96-2016 with number 20180731-E480063.

Exclusive certificate for the DDCE 100 Plus UL model.

The six (6) units, supplied by DINNTECO, described in section 3.0, have been subjected to vibration tests in accordance with standard IEC 60068-2-6:2007.

Section 10.0 describes the results of the tests to which the units have been subjected.

After these tests were performed, the equipment underwent a visual inspection in which no structural anomalies were detected.

Report CNS2_2410013

Evaluation of the performance of DDCE marine, dinmar, and dinfil models in accordance with UNE EN ISO 9227 NSS:2023 standards.

Satisfactory result; no incidents during testing (subject to ENAC. Accreditation No. 1133/LE2199).

RINA Type Approval: ELE025924XG

nº certificate: PQA109824XG

products: DDCE marine, dinmar and dinfil

manufacturer: dinnteco factory gasteiz slu

place of manufacturer: c/ alibarra 30, pabellon 1, 01010 vitoria gasteiz, spain

technical documentation: available in audit reports